Win 10 right click map network drive3/28/2023 ![]() Once the drive is booted up, turn your computer back on and look for the Seagate Consumer NAS again under File Explorer > Network. Wait about two minutes after plugging your router back in and then reconnect the Seagate Consumer NAS's Ethernet cable and power.Once it's completely disconnected, turn off your computer, and then reboot your router. First, unplug the Seagate Consumer NAS from power, and then from the network by unplugging the Ethernet cable.Steps to power cycle your network are below. If nothing on your network sees the drive at all, then you should power cycle your network. If you still cannot access the drive, check to see if another device (computer, TV, or Media Player) on your network you can see the drive.Make sure you are not connected to a guest network. Your Seagate Consumer NAS is plugged into your router via Ethernet cable and your computer is connected via Ethernet or Wi-Fi to that same router. Here is an example of how it should be configured. Make sure the computer is connected to the same network as the Seagate Consumer NAS.If that still doesn't let you connect to your drive, then your computer might not be connected to the correct network. Note: The NAS has been mapped to the computer and will be located in File Explorer under (My) Computer or This PC. Sign in with your username and password.Note: Always map the Private share before you map the Public share. Right Click on the share you would like to access and choose Map Network Drive.If you see the NAS in command prompt but can't access it with Windows Explorer, you need to contact your firewall manufacturer for help changing the settings of your firewall. Note: Some firewalls will restrict access to a NAS. A new File Explorer window should open and you will see the shares on the NAS.Note: Make sure you use a backslash (\) and not a forward slash (/). Once you have located the IP address, Press the Windows key ( ) R.All Seagate Consumer NAS products will begin with a MAC address of 00:10:75. Note: Your MAC address can be found on the bottom of your Seagate Consumer NAS. ![]() This is the IP address of your Seagate Consumer NAS. Once you find it follow it to the left and make note of the IP address associated with it. Look for a Physical Address starting with 00-10-75.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |